Only this week I was confronted by a builder in Texas who was showing me the room that he was turning into a custom wine cellar for his customer.
He mentioned he knew about adding the correct vapor barrier and insulation. Then, in the next breath, he said “and I am leaving ½” open below the door so that the room gets good air circulation!”
Air circulation coming from the next room in your home into your wine cellar is exactly what you do NOT want.
Your wine cellar must be sealed like a package. See How to Build Your Wine Cellar. The reason for the vapor barrier is to ensure that the temperature and humidity inside the room, controlled by your wine cellar cooling units, is kept at a lower temperature and higher humidity than in the rest of your home.
To age and preserve wine properly you need to maintain a very stable temperature of 55 to 60 degrees and 50 to 70 percent humidity inside your wine cellar. Leaving a gap under the door allows the cold air to escape and warm air to enter the room, creating difficulty maintaining the correct temperature and humidity. All air going into our coming out of the room should be going through the wine cellar climate control system you have chosen.
Yes, it is possible to maintain the room’s temperature and humidity with this gap. However, you will need a larger wine cellar cooling unit and your unit will run longer, causing an increase in expense to the homeowner’s electric bill.
The gap under the door is the most often cause of cooling loss in a wine cellar!
An easy remedy is to install an exterior door with the same weather stripping you would use if the door were to the outside. Another remedy is to install a door with an automatic door bottom. The doors offered by the award-winning Wine Cellar Specialists have the option of the wood threshold or the automatic door bottom at no additional charge. This is highly recommended.
Wine Cellar Design Basics – Remember:
1. Seal any gaps.
2. A vapor barrier is absolutely necessary.
3. The more insulation, the better.
Want to learn more? See some of our completed wine cellar builderscustom wine cellars installed in Texas. Or ready to get started? Simply fill in this wine cellar design request and we will create a design for you FREE of charge and without obligation! Kick-off your wine cellar conversion today!
As custom wine cellar design and construction specialists, we frequently come across businesses that offer services that we believe are likely to be of particular interest to our clients and customers who have had built or have an interest in custom wine cellars, commercial wine racks, wine displays, and wine generally. If fact we have often been asked to provide a list or a recommendation. To that end, we have created a Custom Wine Cellars Related Business Listings page.
Please note – Custom Wine Cellars Related Business Listing Disclaimer
The businesses listed at the link above are a mix of companies that we like, do business with ourselves, have been recommended to us or are just simply aware of. Businesses listed on our “Custom Wine Cellars Related Business Listings” page should not be construed as a personal or business recommendation. They are simply there for your convenience and as a way for us to share information with you.
We may or may not have commercial relationships with these companies. We may or may not receive affiliate commissions as a result of your following the links and ultimately purchasing a product or services from them. We can say that if there is an affiliate relationship, it will in no way affect the pricing you receive from that company.
Our criteria for listing a business is that in our opinion we believe the business is relevant to the wine industry and of potential interest to wine lovers, collectors, and owners of wine-related businesses.
If you are interested in having your business listed, simply email your request to WineCellarBuilders@CustomWineCellarsLosAngeles.com and put “Wine Cellar Specialists – Wine Industry Business Listings” in the title, don’t forget to include a link to your website! We reserve the right to accept or refuse a listing at our discretion.
Chicago Home Wine Cellar Installed with a Cooling System
Poor conditions can be detrimental to wine. Investing in a climate-controlled wine room can protect your investment from harmful external factors.
Wine Cellar Specialists offers a turnkey solution for clients who want to have a custom wine cellar in Chicago that has the ability to maintain the right temperature and humidity levels.
Temperature and Humidity – Factors that Affect Wine Quality
A wine storage room is much more than the wine you choose to store inside it. In fact, the wine, contrary to what you might think, is less a factor in an effective wine cellar than the cellar itself.
For Chicago custom wine cellars of course, ultimately, the wine inside your wine room is what will matter, but in the beginning, and, to some degree, going forward, the cellar itself is what will make or break your collection.
The optimum conditions in a wine cellar can be achieved by regulating the temperature and humidity.
Optimum Conditions Needed by Wine for Proper Maturation
Without the right temperature and humidity in your wine cellar, and in less than ideal conditions, the wine you hope to one day enjoy or sell (wine as investment is not as rare as you may think) will not be there.
Ideal Wine Cellar Temperature
A Stable Temperature Keeps Wine at Its Best
In order to preserve wine’s complex characteristics, it needs to be stored in a room where the wine cellar temperature is approximately between 55-65 degrees Fahrenheit.
Wine Cellar Humidity
In addition to temperature, humidity can indirectly affect the quality of your wine. Your wine cellar should be able to keep the humidity level between 50-75%.
Too low of a humidity level in your Chicago wine cellar may dry out the cork, allowing unwanted oxygen to get into the bottle. When this happens, oxidation occurs. Oxidation causes off flavors and flat aromas in wine. It also causes wine discoloration. Premature browning in reds and a deeper yellow color in whites are indications that wine has been oxidized.
Too high a humidity level can trigger mold growth that can damage the wine labels and wine racks.
Achieve Proper Storage Conditions by Careful Planning and Choosing the Cooling System Ideal for Chicago Custom Wine Cellars
Wine Guardian Refrigeration System Offered by Wine Cellar Specialists Chicago
With some careful planning, forward-thinking, and the right cellar, how you want your wine to be when you one day drink it is achievable and very possible.
Some people choose to build their Chicago custom wine cellar in a basement, and while this may be the best space in your home in which to create a cellar, (assuming you actually have a basement), keep in mind that the conditions in your basement are not necessarily ideal for wine storage or more importantly the proper aging of your wine collection.
Also, you should create an environmentally controlled space for your wine collection.
Installing a Refrigeration System Can Help Maintain Constant Temperature and Humidity in Chicago Wine Cellars
So make sure that regardless of the conditions outside, or even in your home, you are using an efficient refrigeration unit.
Such a system also means that your cellar does not have to be in a basement.
Effective wine cellar cooling units correctly controlling your wine rooms climate means the sky is the limit when it comes to cellar location, or is at least only limited by the size of your home.
Of course, where you place your wine cellar is based on how a cooling system can be installed. If installing a self-contained unit, you need to be able to vent directly through the wall outside (only units specifically designed for extreme conditions) or to another room that is heat and air-conditioned and is at least twice the size of your cellar.(the most cost-effective method.)
If using a split system, you can place your condenser up to 50 feet from the evaporator and either copper lines or ducting might be used. There are many ways and types of cooling systems.
Avoid These Common Custom Wine Cellar Cooling Mistakes
Whether it’s traditional or modern custom wine cellars, proper cooling systems are required to prevent wine molding.
Knowing the right thing to do doesn’t mean you’ll end up with no mistakes during the process. Even if you’re knowledgeable about proper custom wine cellar cooling, there’s always room for error (as well as improvements). That said, you should avoid these common mistakes when dealing with a cooling unit:
Blending or mixing hot air exhaust and fresh air intake — the cooling unit won’t work correctly if it re-uses its hot exhaust air. If you’re challenged by room space, there are various types of cooling units to choose from, such as a split system, ducted system, and self-contained system.
Making the wine cellar the source of fresh air — make sure that fresh air will come from an external source and not within the cellar to ensure proper airflow.
Not paying attention to the cooling unit’s extreme temperature capability — as a custom wine cellar owner, you should be familiar with the capacity of your cooling unit. There are seasons when the temperature is extreme. Make sure the custom wine cellar cooling unit is capable of adapting to a consistently changing environment.
Picking a cooling unit based on one factor — never ever choose a cooling unit based on one factor. A lot of things can affect humidity. Not only the size of the wine cellar itself but also the walls that surround it. Whether it’s glass, wood, or any specific material that encloses a wine cellar, this affects the thermal load of a room which contributes to the humidity level.
Consult a Wine Cellar Specialist to Determine What Can Be Used in Your Situation
You must choose the correct cooling unit for your Chicago custom wine cellar so that it cools efficiently for your particular conditions. Not only the size of the room but the insulation, the door, where the cellar is located inside the home are all factors when determining the correct size of the unit.
At Wine Cellar Specialists, they make a careful assessment of their client’s needs to ensure that all the components are of high quality and installed properly.
Heat Load Calculation
Wine Guardian Refrigeration Unit Installed by a Chicago Expert
A wine cellar specialist can do a heat load calculation to determine the size of unit that you will need. The correct unit can be counted on to keep your wine collection safe. Do not size your cooling unit solely by the cubic footage of your wine cellar. A heat load calculation will take into account the size of your room as well as the amount of insulation, glass, the number of doors, interior and exterior walls, etc. to determine the amount of BTUH needed to correctly cool your room.
You will find that temperature and humidity will become common words around your home, as these are the two aspects in your cellar that are keys to proper wine storage.
Digital Control – an Important Feature of Cooling Units for Chicago Custom Wine Cellars
The cooling units automatically run in cycles to maintain the correct temperature.
Digital controls are part of most units, but is offered as an option, consider going with it, even if it adds to the price of your unit.
Protect Your Wines from Being Damaged. Contact a Professional.
Wine Cellar Specialists – a Reliable Wine Cellar Cooling Expert
Prevent wine spoilage by choosing a wine cellar cooling expert in Chicago. Let Wine Cellar Specialists help you determine the refrigeration system that can maintain the ideal temperature and humidity in your wine room.
We had a start to finish excellent experience with Wine Cellar Specialists. After talking to a couple of carpenters about converting a closet into a small wine cellar I wasn't very confident they knew what they were doing so I started looking for expertise and found Wine Cellar Specialists.
I had my consultation with Brad Cupp and he was very passionate about their business and options
Steve Gee
We had a fantastic experience with Brad Cupp and Wine Cellar Specialists-Dallas. They converted an under-the-stair closet into a fabulous refrigerator cellar that holds about 400 bottles of wine. The attention to detail and craftsmanship was well worth the time it took to complete this job. You don't always get what you pay for, but in this case, I truly believe that we did. Thank you for an exceptional job.
Timothy Martin
Wine Cellar Specialists provided us a custom black iron/glass door as the main feature to our new wine cellar. The quality is excellent and the look is just what I asked for. Thanks so much.
Aiden K
I purchased a wine cellar door from Wine Cellar Specialist and had the pleasure of working with Alex. She helped me design a custom door that was absolutely beautiful. This was a very big project and she was so kind and professional and held my hand throughout the whole process. It was an amazing experience. I researched other companies before choosing Wine Cellar Specialists and it was their customer service and attention to detail that made my decision so easy. I highly recommend them for any wine cellar project.
G
Gary Anderson
Great experience with the process and progress completion - Brad Cupp dons well in coordinating and communication. All the sub contractors were good to work with and were attentive to cleaning after work. Plus the important end result was a wonderful wine cellar that can accommodate over 700 bottles of wine in relatively small area. Highly recommend!
Dallas 
Why do I need to “Seal” my wine cellar?
To age and preserve wine properly you need to maintain a very stable temperature of 55 to 60 degrees and 50 to 70 percent humidity inside your wine cellar. Leaving a gap under the door allows the cold air to escape and warm air to enter the room, creating difficulty maintaining the correct temperature and humidity. All air going into our coming out of the room should be going through the wine cellar climate control system you have chosen.
